MillFlatDrawing
A 3D preview of this design’s toolpaths, simulated in RapidCAM. It is not a photo of a cut part.
Mounting Plate (with CAM)
by Jenn · 9/23/2026 · 3 downloads
The mounting plate with its toolpaths: four fixing holes drilled, then the outline profiled. The same part as Mounting Plate, which is the drawing alone — open both to compare a sketch with its CAM.
Opens in your browser — nothing to install, no account needed. Change any dimension and the geometry re-solves; the G-code is generated on your own machine profile.
What it needs
- Machine
- mill
- Work area
- 170 × 130 mm
- Stock thickness
- 10 mm
- Toolpaths
- drill, profile
- Cuts
- Through — 11 mm deep
- Cutters required
- 6, 8 mm (drill, end-mill)
- Shapes
- 7
- Format
- v3
- Licence
- CC BY 4.0
Every value above is derived from the file itself, not typed in by the author.
Made one
Nobody has posted a photo of this one yet. If you cut it, a picture of the result is the most useful thing you can leave here.
Sign in to post a photo of one you cut.
More designs
Sign in to report a problem with this design.