MillFlat6 mm1 ops
A 3D preview of this design’s toolpaths, simulated in RapidCAM. It is not a photo of a cut part.
Block Hole Pattern
by Jenn · 9/23/2026 · 2 downloads
Twelve holes in two sets — M6 clearance bores and smaller dowel holes — each on its own drill operation so the bit changes once. A starting point for any plate needing a repeatable hole pattern.
Opens in your browser — nothing to install, no account needed. Change any dimension and the geometry re-solves; the G-code is generated on your own machine profile.
What it needs
- Machine
- mill
- Work area
- 230 × 170 mm
- Stock thickness
- 10 mm
- Toolpaths
- drill
- Cuts
- Through — 11 mm deep
- Cutters required
- 4, 6.5 mm (drill)
- Shapes
- 13
- Format
- v3
- Licence
- CC BY 4.0
Every value above is derived from the file itself, not typed in by the author.
Made one
Nobody has posted a photo of this one yet. If you cut it, a picture of the result is the most useful thing you can leave here.
Sign in to post a photo of one you cut.
More designs
Sign in to report a problem with this design.