MillFlat4, 6.5 mm2 ops
A 3D preview of this design’s toolpaths, simulated in RapidCAM. It is not a photo of a cut part.
Flip Spacer Block
by Jenn · 9/23/2026 · 2 downloads
A two-sided job: a recess on the top face, a lightening pocket on the bottom, and the outline cut free from the second side. Worth reading through if you have not set up a flip before.
Opens in your browser — nothing to install, no account needed. Change any dimension and the geometry re-solves; the G-code is generated on your own machine profile.
What it needs
- Machine
- mill
- Work area
- 200 × 150 mm
- Stock thickness
- 18 mm
- Toolpaths
- pocket, profile
- Cuts
- Through — 19 mm deep
- Cutters required
- 6 mm (end-mill)
- Shapes
- 3
- Format
- v3
- Licence
- CC BY 4.0
Every value above is derived from the file itself, not typed in by the author.
Made one
Nobody has posted a photo of this one yet. If you cut it, a picture of the result is the most useful thing you can leave here.
Sign in to post a photo of one you cut.
More designs
Sign in to report a problem with this design.