MillFlat4, 6.5 mm2 ops
A 3D preview of this design’s toolpaths, simulated in RapidCAM. It is not a photo of a cut part.
Clamped Toolplate
by Jenn · 9/23/2026 · 1 download
A 25 mm toolplate with two generated clamps and an adaptive pocket recess. The clamps are generator features, so moving or resizing one regenerates its geometry instead of needing it redrawn.
Opens in your browser — nothing to install, no account needed. Change any dimension and the geometry re-solves; the G-code is generated on your own machine profile.
What it needs
- Machine
- mill
- Work area
- 320 × 220 mm
- Stock thickness
- 25 mm
- Toolpaths
- Cuts
- 14 mm deep, not through
- Cutters required
- 6 mm (end-mill)
- Shapes
- 4
- Format
- v3
- Licence
- CC BY 4.0
Every value above is derived from the file itself, not typed in by the author.
Made one
Nobody has posted a photo of this one yet. If you cut it, a picture of the result is the most useful thing you can leave here.
Sign in to post a photo of one you cut.
More designs
Sign in to report a problem with this design.