MillFlat6 mm1 ops
Box-Joint Tab & Slot Panel
by Jenn · 9/18/2026 · 5 downloads
Parametric box-joint panel. Change the stock thickness and the fingers re-solve to match. 3 mm cutter.
Opens in your browser — nothing to install, no account needed. Change any dimension and the geometry re-solves; the G-code is generated on your own machine profile.
What you can change
Named values this design is built from. Open it in RapidCAM, change one, and the geometry re-solves around it — that is the difference between a design and a finished shape.
- tabWidth
- 20
- fingerDepth
- 6 · stock
What it needs
- Machine
- mill
- Work area
- 140 × 80 mm
- Stock thickness
- 6 mm
- Toolpaths
- profile
- Cuts
- Through — 6.5 mm deep
- Cutters required
- 3 mm (end-mill)
- Shapes
- 1
- Format
- v3
- Licence
- CC BY 4.0
Every value above is derived from the file itself, not typed in by the author.
Made one
Nobody has posted a photo of this one yet. If you cut it, a picture of the result is the most useful thing you can leave here.
Sign in to post a photo of one you cut.
More designs
Sign in to report a problem with this design.