MillFlat6 mm2 ops
A 3D preview of this design’s toolpaths, simulated in RapidCAM. It is not a photo of a cut part.
Nested Sheet
by Jenn · 9/23/2026 · 5 downloads
Six parts nested on one 250 × 132 mm sheet: every hole bored first, then all outlines cut with holding tabs, so nothing breaks loose and moves before the last pass has finished.
Opens in your browser — nothing to install, no account needed. Change any dimension and the geometry re-solves; the G-code is generated on your own machine profile.
What it needs
- Machine
- mill
- Work area
- 250 × 132 mm
- Stock thickness
- 12 mm
- Toolpaths
- profile
- Cuts
- Through — 12.5 mm deep
- Cutters required
- 3 mm (end-mill)
- Shapes
- 18
- Format
- v3
- Licence
- CC BY 4.0
Every value above is derived from the file itself, not typed in by the author.
Made one
Nobody has posted a photo of this one yet. If you cut it, a picture of the result is the most useful thing you can leave here.
Sign in to post a photo of one you cut.
More designs
Sign in to report a problem with this design.