MillFlat6, 25 mm2 ops
A 3D preview of this design’s toolpaths, simulated in RapidCAM. It is not a photo of a cut part.
V-Carve Sign
by Jenn · 9/18/2026 · 22 downloads
Opens in your browser — nothing to install, no account needed. Change any dimension and the geometry re-solves; the G-code is generated on your own machine profile.
What it needs
- Machine
- mill
- Work area
- 220 × 120 mm
- Stock thickness
- 18 mm
- Toolpaths
- chamfer, profile, vcarve
- Cuts
- Through — 19 mm deep
- Cutters required
- 6, 12 mm (end-mill, v-bit)
- Shapes
- 2
- Format
- v3
- Licence
- CC BY 4.0
Every value above is derived from the file itself, not typed in by the author.
Notes
V-carved lettering with a chamfered edge and profile cut. Three operations, 12 mm V-bit and 6 mm end mill, 18 mm stock.
Made one
Nobody has posted a photo of this one yet. If you cut it, a picture of the result is the most useful thing you can leave here.
Sign in to post a photo of one you cut.
More designs
Sign in to report a problem with this design.