MillFlat6, 8 mm2 ops
A 3D preview of this design’s toolpaths, simulated in RapidCAM. It is not a photo of a cut part.
Inlay Coaster
by Jenn · 9/23/2026 · 4 downloads
A coaster with lettering cut as a true inlay — the male and female halves come from one inlay operation, so an oak plug drops into the pocket and sands flush rather than sitting proud.
Opens in your browser — nothing to install, no account needed. Change any dimension and the geometry re-solves; the G-code is generated on your own machine profile.
What it needs
- Machine
- mill
- Work area
- 140 × 140 mm
- Stock thickness
- 12 mm
- Toolpaths
- inlay
- Cuts
- 3 mm deep, not through
- Cutters required
- 12 mm (v-bit)
- Shapes
- 2
- Format
- v3
- Licence
- CC BY 4.0
Every value above is derived from the file itself, not typed in by the author.
Made one
Nobody has posted a photo of this one yet. If you cut it, a picture of the result is the most useful thing you can leave here.
Sign in to post a photo of one you cut.
More designs
Sign in to report a problem with this design.