MillFlat6, 8 mm2 ops
A 3D preview of this design’s toolpaths, simulated in RapidCAM. It is not a photo of a cut part.
Relief Medallion
by Jenn · 9/23/2026 · 1 download
A three-dimensional relief carved from a 128 × 128 greyscale heightmap over 12 mm of depth: a roughing pass to clear the bulk, then a fine engrave pass to finish the surface.
Opens in your browser — nothing to install, no account needed. Change any dimension and the geometry re-solves; the G-code is generated on your own machine profile.
What it needs
- Machine
- mill
- Work area
- 120 × 120 mm
- Stock thickness
- 20 mm
- Toolpaths
- engrave, relief-rough
- Cuts
- 12 mm deep, not through
- Cutters required
- 6 mm (ball-nose, end-mill)
- Shapes
- 1
- Format
- v3
- Licence
- CC BY 4.0
Every value above is derived from the file itself, not typed in by the author.
Made one
Nobody has posted a photo of this one yet. If you cut it, a picture of the result is the most useful thing you can leave here.
Sign in to post a photo of one you cut.
More designs
Sign in to report a problem with this design.